ss52-lfr thru ss510-lfr page: 1 frontier electronics corp. 667 e. cochran street, simi valley, ca 93065 tel: (805) 522-9998 fax: (805) 522-9989 e-mail: frontiersales@frontierusa.com web: http://www.frontierusa.com 5a surface mount schottky barrier rectifiers ss52-lfr thru ss510-lfr features z for surface mounted applications z low profile package z built-in strain relief z easy pick and place z plastic material used carries underwriters laboratory classification 94 v-0 z extremely low vf z majority carrier conduction z high temperature soldering: 250c/10 seconds at terminals z rohs mechanical data z case: molded plastic, do- 214ab (smc), dimensions in inches and (millimeters) z terminals: solder plated z polarity indicated by cathode band z weight 0.21 grams maximum ratings and electrical characteristics ratings at 25 c ambient temperature unless otherwise specified single phase, half wave, 60 hz, resistive or inductive load. for capacitive load, derate current by 20% ratings symbol ss52-lf r ss53-lf r ss54-lf r ss55-lf r ss56-lf r ss58-lf r ss510-lf r units maximum recurrent peak reverse voltage v rrm 20 30 40 50 60 80 100 v maximum rms voltage v rms 14 21 28 35 42 56 70 v maximum dc blocking voltage v dc 20 30 40 50 60 80 100 v maximum average forward rectified current see fig.1 i o 5.0 a maximum overload surge 8.3ms single half sine-wave i fsm 150 a typical junction capacitance (note 1) c j 300 pf typical thermal resistance (note 2) r jl 17 /w typical thermal resistance (note 2) r ja 55 /w storage temperature range t stg -55 to + 150 operating temperature range t op -55 to + 125 electrical characteristics (a t t a =25 c unless otherwise noted) characteristics symbol ss52-lf r ss53-lf r ss54-lf r ss55-lf r ss56-lf r ss58-lf r ss510-lf r units maximum forward voltage at 5.0a and 25 v f 0.55 0.70 0.85 v maximum reverse current at 25 i r 1 ma note: 1. measured at 1.0 mhz and applied reverse voltage of 4.0 v 2. p.c.b. mounted 0.55?0.55 ?(1414 mm ) 0.013mm thick copper pad areas 3. sma package suffix ? a? , smb package suffix ?b?, smc no suffix .060(1.52) .030(0.76) .320(8.13) .305(7.75) .103(2.62) .079(2.06) .280(7.11) .260(6.60) .245(6.22) .220(5.59) .126(3.20) .114(2.90) cathode
ss52-lfr thru ss510-lfr page: 2 ratings and characteristic curve ss52-lfr thru ss510-lfr fig. 3a - typical reverse characteristics 100 10 1.0 .10 .01 .001 instantaneous reverse current, milliamperes 0 20 40 60 80 100 120 140 percent of rated peak reverse voltage, (%) t j =125 t j =75 t j =25 100 10 1.0 .10 .01 .001 instantaneous reverse current, milliamperes 0 20 40 60 80 100 120 140 percent of rated peak reverse voltage, (%) t j = 75 fig. 3b - typical reverse characteristics fig. 2 - typical instantaneous forward characteristics 20 10 1.0 0.1 instantaneous forward current amperes .1 .3 .5 .7 .9 1.1 1.3 1.5 1.7 1.9 2.1 instantaneous forward voltage, volts t j =25 pulse width=300us 1% duty cycle ss52-lf ~ss54-lf ss55-lf ~ss510-lf fig. 1 - forward current derating curve 5.0 3.75 2.5 1.25 0 average forward current amperes 0 25 50 75 100 125 150 175 single phase half wave 60h z resistive or inductive load lead temperature, p.c.b mounted on 0.30.3?(8.08.0mm) copper pad areas ss52-lf ~ss54-lf t j =150 ss55-lf ~ss510-lf
|